
		Buy EverQuest Platinum

EverQuest - Tweaks

EQclient.ini

The eqclient.ini file can be found in your everquest directory. Use Notepad to open this file and make any of the following changes. NOTE: Always backup your eqclient.ini file before making any changes.

[Defaults] Section (This section contains general information regarding client setup)
AttackOnAssist=TRUE or FALSE	Sets whether or not you want "autoattack" to be automatically turned on after issuing the /assist command in game.
ChatFontSize=[0-5]	This line controls the size of the text font in your chat window. Default is 0. When using full screen mode with higher resolutions, it is helpful to set this value to 2 or higher, depending on your taste, eyesight, and reading comprehension ability.
ChatLineSpacing=0	This line controls the number of spaces between each line of text in your chat window. Default is 0. It is not suggested putting this value over 2, or it could be very difficult to read text as it scrolls by.
DefaultLanguage=0 (Common Tongue)	Sets your default language.
HideAltAdvWin=TRUE or FALSE	Sets whether or not you want to be able to see the alternate advancement window. Same as using V in-game.
HideBuffWin=TRUE or FALSE	Sets whether or not you want to be able to see the buff icon window. Same as using Alt B in-game.
HideChatWin=TRUE or FALSE	Sets whether or not you want to be able to see the main chat window.
HideHotboxWin=TRUE or FALSE	Sets whether or not you want to be able to see the hotbox window. Same as using Alt H in-game.
HideMainMenuWin=TRUE or FALSE	Sets whether or not you want to be able to see the main menu window. Same as using Alt M in-game.
HidePartyWin=TRUE or FALSE	Sets whether or not you want to be able to see the party stat window. Same as using Alt P in-game.
HidePlayerWin=TRUE or FALSE	Sets whether or not you want to be able to see the player stat window. Same as using Alt Y in-game.
HideSpellsWin=TRUE or FALSE	Sets whether or not you want to be able to see the spell icon window. Same as using Alt S in-game.
HideTargetWin=TRUE or FALSE	Sets whether or not you want to be able to see the target window. Same as using Alt T in-game.
InspectOthers=TRUE	This line set to TRUE allows you to inspect others. If set to FALSE, you will not be able to right-click on their character to inspect. The default value is TRUE.
InvWinLabels=TRUE	This is a Velious only line that enables the labeling to show up when in the full screen inventory mode.
LastCharSel=[1-8]	This line controls which character is selected at the character select screen, so that whichever character you played last will be selected when you go to the character select screen the next time you play EverQuest.
LoadSocialAnimations=TRUE or FALSE	Turns the emote animations on or off.
LoadArmor17=TRUE or FALSE LoadArmor18=TRUE or FALSE LoadArmor19=TRUE or FALSE LoadArmor20=TRUE or FALSE LoadArmor21=TRUE or FALSE LoadArmor22=TRUE or FALSE LoadArmor23=TRUE or FALSE	Defines whether or not you want to load the new armor implemented with Velious into your video card's texture memory. Players with older video cards may choose to set one or more of these options to FALSE if you experiencing slow framerate or excess swapping when viewing these armors in areas with many textures. By default, these are all set to "FALSE", as it is possible that those with lower end systems will have problems when attempting to load all of the new armor files. At your option, you can switch all or part of them to "TRUE" to see the new armor. If you have problems with framerate or disk swapping, turn all or part of them back to "FALSE". As a note, though you may be able to obtain the files and make these entries if you are not Velious-enabled, the new armor will not be displayed unless you are. (Velious Only)
LockWindows=FALSE	This statement is the same as hitting Alt-L in game. This allows windows to be rearranged with your cursor if FALSE and locked in place if set to TRUE. You can very easily do this in game with using the Alt-L function to toggle the lock off/on.
Log=TRUE or FALSE	Sets the default state of chat logging to the log file for your character and server. Setting this option to true would have the same effect as logging into the game and typing "/log on" at the beginning of every play session.
MousePointerSpeedMod=[0-3]	This is to allow faster movement across the screen by your mouse. The higher the number, the faster the mouse scrolling will be. Default is 0. It is not suggested to set this to higher than 3, as it makes it difficult to accurately control the mouse movement.
NewUI=TRUE or FALSE	Sets the default User Interface. Set to TRUE to use the new EverQuest interface, set to FALSE to use the old interface. This is now no longer valid, as the old style is no longer available.
RunMode=TRUE or FALSE	Sets whether or not you want to automatically "run" when you log into the game.
ScreenMode=NORMAL or FULL	Sets the default screen mode for when you enter the game.
ScreenshotType=XXX	Where XXX can be one of the following format: BMP, JPG, TGA, DDS, PNG. If this is missing the default will be BMP, all screenshots are saved in the Screenshot folder.
ShowAlarmWindow=true or false	Turns the Alarm window on or off when first logging in.
ShowDynamicLights=TRUE	Having this line set to TRUE enables the player to see special graphics due to light sources on your character such as torches, greater lightstones, in a new light so to speak.
ServerFilter=0 (NO) or 1 (YES)	If this line is set to 1, than Server side filtering is occurring. Default is 0. If you are having problems with lag in a raid situation, or when many other players are in the same general area in EverQuest, it is best to have this set to 1.
ShowGrass=TRUE or FALSE	Defines whether or not you will be able to see textured grass in some Luclin zones.
ShowInspectMessage=TRUE or FALSE	Sets whether or not you want the "CharacterName is inspecting you" message to be displayed when you are inspected by another character.
ShowNamesLevel=4 (default)	This line allows you to control how much of a character's name will be displayed.
ShowSpellEffects=0 (NO) or 1 (YES)	This line allows particle effects to be shown if it equals 1. If this line equals 0, no particle effects will be seen in-game when someone casts a spell.
Sound=TRUE or FALSE	Turns sound on or off.
TextureCache=TRUE or FALSE	Enables or disables texture caching. This setting will store textures (.txc) on your local hard drive. Once there, it can help to increase load times while zoning.
TrackFilterType=0	This is another Ranger only line that is best changed in-game. The command in game allows you to specify not showing certain conning creatures. Default is 0. Please refer to the section later in this manual dealing with all of the /commands to see the proper use of this in game.
TrackPlayers=TRUE or GROUP or FALSE	This line shows the current selection (Default is TRUE) for showing players in tracking, not showing players, or only group members. It is suggested to change this setting in game to change this value.
TrackSortType=NORMAL or DISTANCE or CONSIDER or RDISTANCE or RCONSIDER	This is a Ranger only ability and is best changed in game. It changes the way that tracking is sorted, and how it shows up.
UseD3DtextureCompression=TRUE or FALSE	This line turns on/off texture compression. If set to TRUE, it can add much time loading to the game between the server select and character select screens, but can also improve performance.
UseLuclinElementals=TRUE or FALSE UseLuclinHumanMale=TRUE or FALSE UseLuclinHumanFemale=TRUE or FALSE UseLuclinBarbarianMale=TRUE or FALSE UseLuclinBarbarianFemale=TRUE or FALSE UseLuclinEruditeMale=TRUE or FALSE UseLuclinEruditeFemale=TRUE or FALSE UseLuclinWoodElfMale=TRUE or FALSE UseLuclinWoodElfFemale=TRUE or FALSE UseLuclinHighElfMale=TRUE or FALSE UseLuclinHighElfFemale=TRUE or FALSE UseLuclinDarkElfMale=TRUE or FALSE UseLuclinDarkElfFemale=TRUE or FALSE UseLuclinHalfElfMale=TRUE or FALSE UseLuclinHalfElfFemale=TRUE or FALSE UseLuclinDwarfMale=TRUE or FALSE UseLuclinDwarfFemale=TRUE or FALSE UseLuclinTrollMale=TRUE or FALSE UseLuclinTrollFemale=TRUE or FALSE UseLuclinOgreMale=TRUE or FALSE UseLuclinOgreFemale=TRUE or FALSE UseLuclinHalflingMale=TRUE or FALSE UseLuclinHalflingFemale=TRUE or FALSE UseLuclinGnomeMale=TRUE or FALSE UseLuclinGnomeFemale=TRUE or FALSE UseLuclinIksarMale=TRUE or FALSE UseLuclinIksarFemale=TRUE or FALSE UseLuclinVahShirMale=TRUE or FALSE UseLuclinVahShirFemale=TRUE or FALSE	This is a Shadows of Luclin only setting. This allows you to define which new Luclin character models you can see. Each race has a male and female setting and must be flagged separately. In order to see any Erudite or Barbarian model, the corresponding Human model must be set to TRUE. In order to see any High Elf, Dark Elf, or Half Elf model, the corresponding Wood Elf model must be set to TRUE. It is recommended that if you do not have a top-of-the-line system, that you disable all unnecessary models to increase your system performance.
UISkin=Default	Use this setting to globally set your characters to utilize a specific UI skin. Leave the setting to Default to use separate UI skins for different characters.
VideoMode=[0-4]	0 is 640/480 resolution, 1 is 800/600. 2 is 1024/768. 3 is 1280/1024. 4 is 1600/1200. Players need to have the Velious expansion in order to set this line to 3 or 4.
VideoModeBitsPerPixel=16 or 32	This line reflects and controls the video mode while in EverQuest. Default is 16 bits. It is suggested that most players keep this value at 16 as increasing to 32 can cause a decrease of performance.

[VideoMode] Section (This section contains information about your video settings)
Width=800	Sets your screen width. Its recommended that you use the video settings feature in your in-game options (Alt O).
Height=600	Sets your screen height. Its recommended that you use the video settings feature in your in-game options (Alt O).
RefreshRate=0	Sets your monitor's refresh rate. Its recommended that you use the video settings feature in your in-game options (Alt O).
BitsPerPixel=16	Sets your monitor's bits per pixel. Its recommended that you use the video settings feature in your in-game options (Alt O)

The [TextColors] section of eqclient.ini contains entries for various text colors in the client. All colors are to be set with Red, Green, and Blue values, in decimal. Valid settings for each color range between 0 and 255.
1	Say
2	Tell
3	Group
4	Guild
5	OOC
6	Auction
7	Shout
8	Emote
9	Spells
10	You hit other
11	Other hits you
12	You miss other
13	Other misses you
14	Some broadcasts
15	Skills
16	Special Abilities
17	Unused at this time
18	Default Text
19	Unused at this time
20	Merchant Offer Price
21	Merchant Buy/Sell
22	Your death message
23	Others death message
24	Other damage other
25	Other miss other
26	/who command
27	yell for help
28	Hit for non-melee
29	Spell worn off
30	Money splits
31	Loot message
32	Dice Roll (/random)
33	Others spells
34	Spell Failures
35	Chat Channel
36	Chat Channel 1
37	Chat Channel 2
38	Chat Channel 3
39	Chat Channel 4
40	Chat Channel 5
41	Chat Channel 6
42	Chat Channel 7
43	Chat Channel 8
44	Chat Channel 9
45	Chat Channel 10
46	Melee Crits
47	Spell Crits
48	Too far away (melee)
49	NPC Rampage
50	NPC Flurry
51	NPC Enrage
52	Say echo
53	Tell echo
54	Group echo
55	Guild echo
56	OOC echo
57	Auction echo
58	Shout echo
59	Emote echo
60	Chat Channel 1 echo
61	Chat Channel 2 echo
62	Chat Channel 3 echo
63	Chat Channel 4 echo
64	Chat Channel 5 echo
65	Chat Channel 6 echo
66	Chat Channel 7 echo
67	Chat Channel 8 echo
68	Chat Channel 9 echo
69	Chat Channel 10 echo
70	Unused at this time
71	Item Tags
72	Raid Say
73	My Pet
74	Damage Shield
75	Leadership Messages
76	Pet Rampage/Flurry
77	Pet Crits
78	Focus Effects
79	Experience Messages
80	System Message

Top Of Page